IUMSC - Indiana University Molecular Structure Center

/SPACE	SECURE THE SYSTEM
/**	ERASE ANGLES FILE (E.G.B:ANG.DAT)
/AA	ADJUST ANGLES (TO OMEGA=0)
/AD	ALIGN DIFFRACTOMETER
/AE	REPEAT /AD CALCULATIONS (DISPLAY)
/AI	ANGLES TO INDICES
/AS	AZIMUTH SCAN - SCAN AT A SPECIFIED AZIMUTH
/C*	ERASE PROFILE FILE (C:SCAN.DAT)
/CA	CALCULATE CELL PARAMETERS
/CB	ENTER CB MATRIX DATA
/CD	COLLECT DATA
/CE	CENTER A REFLECTION
/CF	CLEAR FILTER FOR DATA COLLECTION
/CP	COLLECT A PROFILE (DIFFERENT INPUT THAN /IR)
/CS	CLEAR SCAN MODE (SPEED = SLEW)
/CU	ENTER CU MATRIX DATA
/C2	2ND FORM OF /CU (HK
/CX	NUMBER OF PROFILES COLLECTED
/DA	DRIVE TO CALCULATED ANGLES (LAST /IA)
/DC	DRIVE CHI
/DF	DRIVE FILTER WHEEL
/DI	DRIVE TO CURRENT ANGLE + AN INCREMENT
/DM	DRIVE MOTORS (ENTER ALL 5 )
/DO	DRIVE OMEGA
/DP	DRIVE PHI
/DT	DRIVE 2THETA
/D-	DRIVE 2THETA TO -2THETA
/DZ	DRIVE ALL ANGLES TO ZERO, FILTER TO 1
/EX	EXERCISE - ALL MOTORS SEESAW 10 DEGREES
/F*	ERASE INTENSITY DATA FILE (E.G. B:REF.DAT)
/FX	NUMBER OF REFL. COLLECTED
/GP	GONIOSTAT ANGLES TO PSI CALCULATION
/IA	INDICES TO ANGLES
/ID	INTERUPT DATA COLLECTION (/CD)
/IN	INITIALIZE SEQUENCE NO. FOR DATA COLLECTION
/IR	COLLECT INDIVIDUAL REFLECTION(S)
/IS	ENTER DATA FOR STANDARDS (MAXIMUM OF 7)
/IV	INTERVECTOR ANGLE (ENTER CHI1, PHI1,CHI2, PHI2)
/LA	LOAD ANGLES (ENTER ALL 5)
/LC	LOAD CHI
/LF	LOAD FILTER
/LI	LOAD INDEX SEQUENCE FOR DATA COLLECTION
/LO	LOAD OMEGA
/LP	LOAD PHI
/LR	LOAD REJECT ROUTINE REJECT OR RE (REJECTS ONLY H K L = 0 0 0) ACENT OR AC BCENT OR BC CCENT OR CC FCENT OR FC RCENT OR RC ICENT OF IC CUBICP OR CP (CUBIC PRIMITIVE ELIMINATES 3-FOLD REDUNDANCY) CUBICF OR CF (COMBINES CUBICP AND FCENT) CUBICI OR CI (COMBINES CUBICP AND ICENT)
/L-	REVERSE AN EXISTING REJECT ROUTINE I.E. COLLECT ONLY THE EXTINCTIONS (DOES NOT AFFECT REJECT OR CUBICP)
/LT	LOAD 2THETA
/LZ	LOAD ZEROS FOR ANGLESFILT = 1
/MS	MEASURE STANDARDS
/MT	ENTER UB MATRIX DATA [3*(HKLANGLES)]
/M2	2ND FORM OF /MT (HKL + LINE NUMBERS)
/M3	3RD FORM OF /MT (REINDEX LAST /MT)
/M4	4TH FORM OF /MT (3 LINE NUMBERS)
/NP	NORMAL AND/OR PROFILE DATA SELECTION
/PA	PRINT CURRENT ANGLES
/PF	PRINT REFLECTION DATA
/PG	PSI TO GONIOSTAT ANGLES CALCULATION
/PM	PRINT ANGLE DATA (/SA'S)
/PP	PRINT PREREQUISITES FOR DATA COLLECTION
/PR	PRINT A FILE (GENERAL E.G. A:PFILE)
/PS	PRINT STANDARDS (SUBSET OF /PF)
/PT	ENTER PRESET TIME (=BKG TIME IN /SD)
/QA	LOCAL VERSION OF QACELL (REFINEMENT ONLY)
/QU	QUIT. THE ONLY CLEAN EXIT; SAVES ANGLES
/RD	RESUME DATA COLLECTION
/RL	READ THE 'LOAD' FILE (C:LOD.DAT)
/RP	READ A PROCEDURE PFILE
/S0	CLOSE THE SHUTTER
/S1	OPEN THE SHUTTER
/S?	PRINT SHUTTER STATUS
/SA	STORE ANGLE DATA
/SC	SET SCAN
/SD	ENTER BACKGND TIME WL WH DISP. FACTOR
/SF	SET FILTER FOR DATA COLLECTION
/SH	USE/IGNORE SHUTTER ROUTINES
/SK	SKIP 1ST STANDARDS ON NEXT /CD
/SL	SAVE THE 'LOAD' FILE
/SP	SET PHI SCAN IN STANDARDS ROUTINE (ICE CONTROL)
/SR	ENTER CHI AND 2THETA COLLISION LIMITS
/ST	START TIMER/SCALER
/TB	COLLECT TOP/BOTTOM/LEFT/RIGHT COUNTS
/TO	2THETA OR OMEGA SCAN SELECTION
/TX	NUMBER OF ANGLES (/SA'S) COLLECTED
/TY	TYPE A MESSAGE
/UB	ENTER THE UB MATRIX
/VO	VARIANCE OBSERVATIONS
/XF	SHUTTER OFF (CLOSE) = /S0
/XN	SHUTTER ON (OPEN) = /S1
/X?	SHUTTER STATUS = /S?
/WV	'CU' OR WAVELENGTH
/Z1	ZERO MOTOR 1 - MOVES 2THETA ONE STEP(.0025 DEGREES) IN (+) DIRECTION
/Z2	ZERO MOTOR 2 (OMEGA)
/Z3	ZERO MOTOR 3 (CHI)
/Z4	ZERO MOTOR 4 (PHI)
/Z5	ZERO MOTOR 5 - MOVES FILTER WHEEL ONE STEP (0.9 DEG. = 1/20TH OF A FILTER POSITION) IN (+) DIRECTION
/+1 thru /+5	SAME AS /Z1 THRU /Z5
/-1 thru /-5	MOVE ONE STEP IN (-) DIRECTION

Facility Status